Axminster TSCE-12R Bedienerhandbuch PDF herunterladen (Seite 2)

List of Contents

1. General Information ............................................2

2. Safety Rules...................................................3-9

3. Contents of Warning Labels......................................10

4. Shipping Contents..............................................11

5. Machine Specification ..........................................12

7. Contents of the shipping Container ...............................14

8. Assembly, Set Up and Adjustment ................................15-24

9. Maintenance ..................................................25

10. Trouble Shooting ..............................................26

11. Part Breakdown and Parts List ...................................27-36

12. Wiring Diagram ................................................37-38

Foundation Drawing ............................................13

1. General Information

The TSCE-series are professional for woodworking machine designed to rip solid

wood, chipboard, fiberboard, plywood and so these materials. Be careful for rigidity of

working materials, don't try forbidden materials such as low flash point metals and

high stiff stone…etc.

HSS (High Speed Steel) sawblade and milling tools should not be used. The sawblade

made in accordance with EN847-1: 1997 shall be used on the machine.

Generally, the table saw shall be installed in the following conditions:

1) Supply voltage: 0.9-1.1 nominal supply voltage

2) Source frequency: 0.99 1.01 nominal frequency

3) Ambient temperature: 5°C-40°C

4) Altitude: shall be at altitudes up to 1000m above mean sea level.

5) Relative humidity: not exceed 50﹪at 40°C.

6) Atmosphere: Free from excessive dust, acid fume,corrosive gases and salt.

7) Avoid exposing to direct sunlight or heat rays which can change the environmental

temp.

8) Avoid exposing to abnormal vibration.

9) Electrical equipment shall withstand the effects of transportation and storage

temperature within a range of -25°C to 55°C and for short periods not exceeding

24 hours at up to +70°C.

This machine was designed for certain applications only. We strongly recommend that

this machine NOT be modified and/or used for any application. DO NOT use the

machine until you have had detail instruction from your dealer.

- 2 -

1 2 3 4 5 6 7 ... 47 48

Keine Kommentare

Axminster TSCE-12R Bedienerhandbuch Seite 2