Axminster AWFS18 Betriebsanleitung PDF herunterladen (Seite 9)

Initial Assembly

Mounting the Scroll Saw

Fitting the Air Delivery Tube:

3) Grasp the plastic air hose on the fretsaw (A) and

push it onto the 1/4” BSP brass ﬁtting until it’s fully

home. (See ﬁg 10).

4) Finally connect the Male & Female in line connectors

from the motor and NVR switch assembly together.

(See ﬁg 11).

Fig 11

Male

Female

Your scroll saw is provided with three threaded

mounted holes (A), see ﬁg 12, it is strongly

recommended that you mount the machine to a

workbench (See ﬁg 12a) or to a purpose built Fretsaw

stand. A pad between the saw and the workbench/

stand is also recommended to reduce vibration. The

workbench/stand should be at least 250 x 410mm.

Ensure you use ﬂat washers between the bolt head

and mounting holes. (DO NOT OVERTIGHTEN) There

are two extra holes (B) for added stability if required.

NOTE: Fretsaw Stand Only. You may need to add

a larger sub-table (MDF or Plywood plate) to give

extra support to larger models.

Fig 12

Fig 12a

SCROLL SAW

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Keine Kommentare

Axminster AWFS18 Betriebsanleitung Seite 9