Axminster T-2000CK Bedienerhandbuch PDF herunterladen (Seite 12)

Assembly Instructions

You will require the steel ducting (12), steel ducting seal

(18), 5/16" button head Hex bolts (e), 5/16" button head

Hex bolt (f), air ﬁlter cartridge (14) and shaker paddle

handle (15).

Step 16 Locate steel ducting (12), insert the ducting seal

(18) into the square recess of the ducting (12), see ﬁg 28.

Fig 28

Place the square end of the ducting (12) over the outlet of

the motor assembly (1), secure in place using eight button

head Hex bolts (f), see ﬁgs 29-30.

Fig 29-30

Step 17 Locate the six button head Hex bolts (e), offer

up the cut out slot in the air ﬁlter cartridge (14) with the

rectangular outlet of the ducting (12). Line up the

pre-drilled holes and secure both units together using

six button head Hex bolts (e), see ﬁgs 31-32.

Fig 31-32

Step 18 Locate shaker paddle hande (15), loosen the grub

screw to the side of the machined aperture using the

supplied Hex key (l), slide the handle (15) onto the shaker

paddle drive shaft, on top of the air ﬁlter (14) and nip up

the grub screw to lock the handle in place, see ﬁgs 33-34.

Fig 33-34

Machined aperture

Grub screw

Step 19 Locate the remaining dust bag (20) and dust bag

securing clip (19). Open up the bag and rap it around the

base of the air ﬁlter (14), see 35. Remove the securing clip

(19) from its packaging, rap it around the ﬁlter (14) and

dust bag (20) and secure the dust bag in place, see ﬁgs

35-36-37.

Fig 35-36-37

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Keine Kommentare

Axminster T-2000CK Bedienerhandbuch Seite 12