Axminster T-2000CK Bedienerhandbuch PDF herunterladen (Seite 11)

Assembly Instructions

Step 12 Turn the cyclone assembly upright on its wheels,

WARNING! THE MACHINE IS HEAVY

YOU ARE ADVISED TO SEEK HELP!

locate the ﬂexible hose (8) and the two Jubilee clips (k).

Place a Jubilee clip over one end of the hose (8), introduce

the hose over the bins inlet manifold and tighten the

Jubilee clip, DON’T OVERTIGHTEN otherwise the hose

will split, see ﬁg 21. Insert the other Jubilee clip over the

Fig 21

other end of the hose and introduce it over the outlet

manifold on the extraction funnel (11), secure in place,

see ﬁg 22.

Fig 22

Step 13 Locate the bin handle (17), line up the holes with

the two pre-drilled holes in the bin (9) and secure in place

with 1/4" Phillips screws (g) and domed head nuts (c), see

ﬁgs 23-24.

Fig 23-24

Step 14 Locate the dust bag (20), open the bag and place

it inside the bin (9), see ﬁg 25. (Make sure the bag is

tucked over the edge of the bin)

Fig 25

Step 15 Position the bin (9) beneath the bin cover (10),

line up the bin lever latches (23) with the hooks on the

bin cover (10), hook on the latches and press down the

lever handles to raise the bin against the cover, making a

tight seal, (see ﬁgs 26-27).

NOTE: you may need to adjust the nuts on lever

latches if the seal between the cover and bin

are not tight, see ﬁg 27.

Fig 26-27

Latch

Hook

Latch adjusing nuts

Continues Over...

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Keine Kommentare

Axminster T-2000CK Bedienerhandbuch Seite 11