Axminster HBS350N Betriebsanleitung PDF herunterladen (Seite 11)

Main Assembly

Optional Wheel Mobility Kit (508207)

The optional wheel kit provides mobility for the

Hobby bandsaw. To assemble follow the instructions

below:

Step 1 Locate the wheel mobility assembly (K), four

M6 bolts, nuts, washers and lifting handle bracket

(L). Line up the slotted holes in the wheel bracket

(K) with the four slotted holes in the two front leg

supports and secure using the M6 bolts, nuts and

washers, see ﬁgs 21-22.

Fig 21-22

Step 2 Locate the lifting handle bracket (L) and two

M8 coach bolts,nuts and washers (E-G). Remove the

two coach bolts from the right support leg to the

rear of the stand assembly, place safely aside, see ﬁg

23. Line up the four holes in the handle bracket (L)

with the four holes in the stand assembly and secure

in place using the four coach bolts, nuts and washers

(E-G), this includes the coach bolts you removed

earlier, see ﬁgs 23-24.

Fig 23-24

Step 6 Locate the mitre fence holder (7) and two

Phillips screws. Line up the holes in the holder

bracket with the pre-drilled holes in the bandsaw

pillar and secure in place with the Phillips screws, see

ﬁg 19. Locate the mitre fence (8) and slide it into the

holder (7), see ﬁg 20.

Fig 19-20

Screwdriver

Removed coach bolts

from the support leg

LE G

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Keine Kommentare

Axminster HBS350N Betriebsanleitung Seite 11